Texture of materials of elements of tribological systems of machines and mechanisms in non-equilibrium processing and functioning conditions
DOI:
https://doi.org/10.31891/2079-1372-2025-116-2-90-100Keywords:
steel, composite, tribological system, microtexturing, X-ray radiation, laser processing, texture perfection, friction testing, reliability, wear resistanceAbstract
The article is devoted to microtexturing of metal and polymer materials of tribological system elements, its influence on the characteristics and properties of working surfaces of samples and parts. Various types of microtexture of steel and composite materials based on zirconium oxide are considered. The mechanism of their formation is clarified. Mainly, the mechanisms of microtexturing are associated with the field of tension created during friction and laser processing. It is determined that laser processing of steel samples leads to combined microtexturing and a texture gradient along the depth of the surface layer of the sample. Texture in composites is revealed both during laser processing and during friction testing. It is shown that the revealed texture positively affects the operational characteristics of parts, increasing the level of reliability and wear resistance, as well as the tribological efficiency of tribocouplings of parts of assemblies, systems, units of machines and mechanisms
References
Aulin, V. V., Kuzyk, O. V., & Kropivnyi, V. M. (2016). Z'iasuvannia pryrody protsesiv strukturnykh ta fazovykh peretvorenʹ v zalizovuhletsevykh splavakh na osnovi utvorennia molekuliarnoi formy vuhletsiu [Clarification of the nature of structural and phase transformations in iron-carbon alloys based on the formation of a molecular form of carbon]. Zbirnyk naukovykh prats Kirovohradsʹkoho natsionalʹnoho tekhnichnoho universytetu. Tekhnika v silʹsʹkohospodarsʹkomu vyrobnytstvi, haluzeve mashynobuduvannia, avtomatyzatsiia, (29), 94–104. (In Ukrainian).
Aulin, V. V., Kropivnyi, V. M., & Kuzyk, O. V. (2017). Formuvannia struktury vysokomitsnykh chavuniv pry vyhotovlenni ta lazernii mofikatsii detalei mashyn [Formation of the structure of high-strength cast irons during manufacturing and laser modification of machine parts]. In Modern methods, innovations, and experience of practical application in the field of technical sciences: International research and practice conference (Radom, Poland, December 27–28, 2017) (pp. 103–106). Radom: Radom Academy of Economics. (In Ukrainian).
Aulin, V., Lysenko, S., Hrynkiv, A., Tykhyi, A., Kuzyk, O., & Livitskyi, O. (2023). The regularity of the change in the coefficient of friction of the coupling of “shaft-sleeve” parts using polymeric materials. Problems of Tribology, 28(1/107), 81–91. [in English].
Aulin, V., Lysenko, S., Hrynkiv, A., & Holub, D. (2022). Thermodynamic substantiation of the direction of nonequilibrium processes in triadconjugations of machine parts based on the principles of maximum and minimum entropy. Problems of Tribology, 27(2/104), 55–63. [in English].
Marchuk, V. Ye., Kindrachuk, M. V., et al. (2019). Napruzheno-deformovanyi stan teksturovanykh poverkhonʹ trybolohichnykh system [Stress-strain state of textured surfaces of tribological systems]. Eastern-European Journal of Enterprise Technologies, 3(12), 44–49. (In Ukrainian).
Marchuk, V. Ye., Kindrachuk, M. V., et al. (2019). Stress‑strained state of textured surfaces with selectively indented regions. Functional Materials, 26(4), 773–778. [in English].
Lesyk, D. A., Dzhemelinskyi, V. V., Danyleiko, O. O., & Khyzhevskyi, V. V. (2016). Doslidzhennia mikrorelefiu ta struktury poverkhnevoho sharu pry lazernii ta ultrazvukovii termodeformatsiinij obrobtsi instrumentalnoi stali [Investigation of surface layer microrelief and structure during laser and ultrasonic thermodeformational treatment of tool steel]. Visnyk NTUU "KPI". Seriia Mashynobuduvannia, (3) [78], 58–64. (In Ukrainian).
Mohyliak, I. A. (2021). Lazerne mikro-nanostrukturovannia ta lehuvannia prypoverkhnevykh shariv napivprovidnykiv [Laser micro/nanostructuring and doping of semiconductor surface layers] (PhD thesis). Ivan Franko National University of Lviv. (In Ukrainian).
Dzhemelinskyi, V. V., & Lesyk, D. A. (2013). Vplyv impulʹsnykh lazerno-ulʹtrazvukovykh dzherel enerhii na formuvannia poverkhnevoho sharu detalei [Influence of pulsed laser-ultrasonic energy sources on the formation of the surface layer of parts]. Skhidnoievropeiskyi zhurnal peredovykh tekhnolohii – Eastern-European Journal of Enterprise Technologies, 2/5(62), 26–30. (In Ukrainian).
Dzhemelinskyi, V. V., & Lesyk, D. A. (2014). Kombinovane lazerno-ulʹtrazvukove poverkhneve zmitsnennia detalei i mozhlyvosti yoho vykorystannia pry vyrobnytstvi ta remonti obladnannia [Combined laser-ultrasonic surface hardening of parts and its application possibilities in equipment manufacturing and repair]. Zbirnyk naukovykh prats (Haluzeve mashynobuduvannia, budivnytstvo). PoltNTU, 3(42), 61–69. (In Ukrainian)
Bernatskyi, A. V. (2013). Pidvyshchennia fizyko-mekhanichnykh vlastyvostei poverkhnevykh shariv stalei lazernym ta kombinovanym lehuvanniam [Improvement of physical and mechanical properties of steel surface layers by laser and combined alloying]. Skhidnoievropeiskyi zhurnal peredovykh tekhnolohii – Eastern-European Journal of Enterprise Technologies, 6/1(66), 25–31. (In Ukrainian).
Milʹman, Yu. V., Hrinkevych, K. E., Mordelʹ, L. V., Kozyriev, D. V., Tkachenko, I. V., & Kuprin, V. V. (2013). Osoblyvosti mekhanichnykh ta trybolohichnykh vlastyvostei intermetalidiv na osnovi aliuminiiu, nikeliu ta tytanu za umov lokalnoho navantazhennia [Peculiarities of mechanical and tribological properties of aluminum-, nickel- and titanium-based intermetallics under local loading]. Elektronna mikroskopiia i mitsnist materialiv: Zbirnyk naukovykh prats IPM NANU, 19, 86–95. (In Ukrainian).
Stupnytskyi, V. V., & Makhorkin, Ye. M. (2013). Trybotehnichnyi kriterii formuvannia funktsionalʹno-oriientovanoi tekhnolohii vyhotovlennia detaliei v mashynobuduvanni [Tribotechnical criterion for formation of functionally oriented technology of manufacturing parts in mechanical engineering]. Mizhvuzivskyi zbirnyk "Naukovi notatky", 42, 305–313. (In Ukrainian).
Mao, B., Siddaiah, A., Liao, Y., & Menezes, P. L. (2020). Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review. Journal of Manufacturing Processes, 53, 153–173. [in English].
Shamsul Baharin, A. F., Ghazali, M. J., & A Wahab, J. (2016). Laser surface texturing and its contribution to friction and wear reduction: A brief review. Industrial Lubrication and Tribology, 68(1), 57–66. [in English].
Wang, S., Yan, F., & Chen, A. (2018). Tribological effects of laser surface texturing and residual stress. Industrial Lubrication and Tribology, 70(1), 126–132. [in English]
Wu, C., Ma, T., et al. (2015). Tribological behavior of femtosecond laser textured surfaces of 20CrNiMo/beryllium bronze tribo-pairs. Industrial Lubrication and Tribology, 67(2), 75–82. [in English].
Effect of laser surface texturing on the tribological properties and scuffing mechanism of CKS piston ring against cast iron cylinder liner under high intensifying. (2022). Tribology Transactions, 65(6), 213–226. [in English].
Zhang, Y., Yang, J., Liu, W., Li, D., & Ren, S. (2022). Effect of laser surface texturing on the tribological properties and scuffing mechanism of CKS piston ring against cast iron cylinder liner under high intensifying. Tribology Transactions, 65(6), 213–226. [in English].
Etsion, I., & Sher, E. (2005). Experimental investigation of partial laser surface texturing for piston-ring friction reduction. Tribology Transactions, 48(4), 583–588. [in English].
Jin, Y., Yan, X., Sun, X., Wang, F., & Fan, K. (2021). Tribological analysis of laser-textured WC-Co against Ti6Al4V under dry and lubricated conditions. Lubricants, 13(1), Article 36, 1–12. [in English].
Waseda, Y. (2010). X-ray diffraction crystallography: Introduction, examples and solved problems. Berlin: Springer. [in English].
Cullity, B. D., & Stock, S. R. (2001). Elements of X-ray diffraction (3rd ed.). Upper Saddle River, NJ: Prentice Hall. [in English].
Aulin, V. V., Derkach, O. D., Makarenko, D. O., & Hrynʹkiv, A. V. (2018). Vplyv rezhymiv ekspluatatsii na znoshchuvannia detaley, vyhotovlenykh z polimerno-kompzytnoho materialu [Influence of operating modes on wear of parts made of polymer-composite material]. Problemy trybolohii, 4, 65–69. (In Ukrainian).
Kniazieva, H. O., Kniaziev, S. A., Tkachuk, M. M., & Pinchuk, N. V. (2021). Perevahy ta nedoliky riznykh metodiv doslidzhenʹ fazovo-strukturnykh staniv materialiv (ohliadova stattia) [Advantages and disadvantages of various methods for studying phase-structural states of materials (review article)]. Visnyk NTU "KhPI". Seriia: Mashynoznavstvo ta SAPR, 2, 51–55. (In Ukrainian).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Problems of Tribology
This work is licensed under a Creative Commons Attribution 4.0 International License.
