Метод повышения долговечности подвижных соединений, работающих в условиях интенсивного износа
DOI:
https://doi.org/10.31891/2079-1372-2020-97-3-39-44Ключові слова:
износ, поверхностная пластическая деформация, пара трения, абразив, прочность.Анотація
В статье рассмотрен метод поверхностного пластического деформирования стальных деталей обкатыванием их роликами. Установлено положительное влияние этого метода на износостойкость пар трения в условиях интенсивного абразивного изнашивания и при обильной смазке
Посилання
. Marchenko D.D. Improving the contact strength of V-belt pulleys using plastic deformation / D.D. Marchenko, K.S. Matvyeyeva // Problems of Tribology. – Khmelnitsky, 2019. – Vol 24. – No 4/94 (2019) – S. 49–53. DOI: https://doi.org/10.31891/2079-1372-2019-94-4-49-53.
2. Butakov B.I. Usovershenstvovanie processa chistovogo obkatyvanija detalej rolikami / B.I. Butakov // Vestnik mashinostroenija. – 1984. – № 7. – S. 50 – 53.
3. Marchenko D.D. Investigation of wear of a contact pair of friction "rope block - rope" / D.D. Marchenko // Problems of Tribology. – Khmelnitsky, 2019. – Vol 24. – No 2/92 (2019) – S. 82–87. DOI: https://doi.org/10.31891/2079-1372-2019-92-2-82-87.
4. Dykha A.V. Study and development of the technology for hardening rope blocks by reeling. ISSN 1729–3774 / A.V. Dykha, D.D. Marchenko, V.A. Artyukh, O.V. Zubiekhina–Khaiiat, V.N. Kurepin // Eastern–European Journal of Enterprise Technologies. Ukraine: PC «TECHNOLOGY CENTER». – 2018. – №2/1 (92) 2018. – pp. 22–32. DOI: https://doi.org/10.15587/1729-4061.2018.126196.
5. Dykha A.V. Prediction the wear of sliding bearings. ISSN 2227–524Х / A.V. Dykha, D.D. Marchenko // International Journal of Engineering and Technology (UAE). India: “Sciencepubco–logo” Science Publishing Corporation. Publisher of International Academic Journals. – 2018. – Vol. 7, No 2.23 (2018). – pp. 4–8. DOI: https://doi.org/10.14419/ijet.v7i2.23.11872.
6. Marchenko D.D. Analysis of the influence of surface plastic deformation on increasing the wear resistance of machine parts / D.D. Marchenko, V.A. Artyukh, K.S. Matvyeyeva // Problems of Tribology. – Khmelnitsky, 2020. – Vol 25. – No 2/96 (2020) – S. 6–11. DOI: https://doi.org/10.31891/2079-1372-2020-96-2-6-11.
7. Aulin V. Wear resistance increase of samples tribomating in oil composite with geo modifier КGМF-1 / V. Aulin, A. Hrynkiv, S. Lysenko, O. Lyashuk, D. Velykodnyi, Y. Vovk, D. Holub, A. Chernai // Tribology in Industry. – Vol. 41, No. 2 (2019). – S. 156 – 165.
8. Aulin V. Exploring a possibility to control the stressed-strained state of cylinder liners in diesel engines by the tribotechnology of alignment / V. Aulin, S.A. Hrynkiv,Lysenko, A. Dykha, T. Zamota, V. Dzyura // Eastern-European Journal of Enterprise Technologies. – 2019. – Vol. 3 (12-99). – P. 6 – 16. DOI: 10.15587/1729-4061.2019.171619.
9. Hrushhev M.M. Jeksperimental'nye osnovy teorii abrazivnogo iznashivanija / M.M. Hrushhev, M.A. Babichev // Vestnik mashinostroenija. – 1964. – №6. – S. 56 – 62.
10. Kashheev V.N. Abrazivnoe razrushenie tverdyh tel: Avtoref. dis. … doktora fiz. mat. nauk / V.N. Kashheev. – Tomsk, 1963. – 45 s.
11. Tenenbaum M.M. Iznosostojkost' konstrukcionnyh materialov i detalej mashin pri abrazivnom iznashivanii / M.M. Tenenbaum. – M.: Mashinostroenie, 1966. – 332 s.
12. Shkol'nik L.M. Tehnologija i prisposoblenija dlja uprochnenija i otdelki detalej nakatyvaniem / L.M. Shkol'nik, V.I. Shahov. – M.: Mashinostroenie, 1964. – 184 s.
13. Matalin A.A. Tehnologicheskie metody povyshenija dolgovechnosti detalej mashin / A.A. Matalin. – Kiev: Tehnika, 1971. – 144 s.
2. Butakov B.I. Usovershenstvovanie processa chistovogo obkatyvanija detalej rolikami / B.I. Butakov // Vestnik mashinostroenija. – 1984. – № 7. – S. 50 – 53.
3. Marchenko D.D. Investigation of wear of a contact pair of friction "rope block - rope" / D.D. Marchenko // Problems of Tribology. – Khmelnitsky, 2019. – Vol 24. – No 2/92 (2019) – S. 82–87. DOI: https://doi.org/10.31891/2079-1372-2019-92-2-82-87.
4. Dykha A.V. Study and development of the technology for hardening rope blocks by reeling. ISSN 1729–3774 / A.V. Dykha, D.D. Marchenko, V.A. Artyukh, O.V. Zubiekhina–Khaiiat, V.N. Kurepin // Eastern–European Journal of Enterprise Technologies. Ukraine: PC «TECHNOLOGY CENTER». – 2018. – №2/1 (92) 2018. – pp. 22–32. DOI: https://doi.org/10.15587/1729-4061.2018.126196.
5. Dykha A.V. Prediction the wear of sliding bearings. ISSN 2227–524Х / A.V. Dykha, D.D. Marchenko // International Journal of Engineering and Technology (UAE). India: “Sciencepubco–logo” Science Publishing Corporation. Publisher of International Academic Journals. – 2018. – Vol. 7, No 2.23 (2018). – pp. 4–8. DOI: https://doi.org/10.14419/ijet.v7i2.23.11872.
6. Marchenko D.D. Analysis of the influence of surface plastic deformation on increasing the wear resistance of machine parts / D.D. Marchenko, V.A. Artyukh, K.S. Matvyeyeva // Problems of Tribology. – Khmelnitsky, 2020. – Vol 25. – No 2/96 (2020) – S. 6–11. DOI: https://doi.org/10.31891/2079-1372-2020-96-2-6-11.
7. Aulin V. Wear resistance increase of samples tribomating in oil composite with geo modifier КGМF-1 / V. Aulin, A. Hrynkiv, S. Lysenko, O. Lyashuk, D. Velykodnyi, Y. Vovk, D. Holub, A. Chernai // Tribology in Industry. – Vol. 41, No. 2 (2019). – S. 156 – 165.
8. Aulin V. Exploring a possibility to control the stressed-strained state of cylinder liners in diesel engines by the tribotechnology of alignment / V. Aulin, S.A. Hrynkiv,Lysenko, A. Dykha, T. Zamota, V. Dzyura // Eastern-European Journal of Enterprise Technologies. – 2019. – Vol. 3 (12-99). – P. 6 – 16. DOI: 10.15587/1729-4061.2019.171619.
9. Hrushhev M.M. Jeksperimental'nye osnovy teorii abrazivnogo iznashivanija / M.M. Hrushhev, M.A. Babichev // Vestnik mashinostroenija. – 1964. – №6. – S. 56 – 62.
10. Kashheev V.N. Abrazivnoe razrushenie tverdyh tel: Avtoref. dis. … doktora fiz. mat. nauk / V.N. Kashheev. – Tomsk, 1963. – 45 s.
11. Tenenbaum M.M. Iznosostojkost' konstrukcionnyh materialov i detalej mashin pri abrazivnom iznashivanii / M.M. Tenenbaum. – M.: Mashinostroenie, 1966. – 332 s.
12. Shkol'nik L.M. Tehnologija i prisposoblenija dlja uprochnenija i otdelki detalej nakatyvaniem / L.M. Shkol'nik, V.I. Shahov. – M.: Mashinostroenie, 1964. – 184 s.
13. Matalin A.A. Tehnologicheskie metody povyshenija dolgovechnosti detalej mashin / A.A. Matalin. – Kiev: Tehnika, 1971. – 144 s.
##submission.downloads##
Опубліковано
2020-09-28
Як цитувати
Marchenko, D., & Matvyeyeva, K. (2020). Метод повышения долговечности подвижных соединений, работающих в условиях интенсивного износа. Проблеми трибології, 25(3/97), 39–44. https://doi.org/10.31891/2079-1372-2020-97-3-39-44
Номер
Розділ
Статті
Хмельницький нацiональний унiверситет