Improved mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism taking into account the wear of its hydraulic cylinder
DOI:
https://doi.org/10.31891/2079-1372-2025-116-2-34-41Keywords:
wear, wear rate, hydraulic cylinder, mechanism, sealing plate, garbage truck, pressing force, municipal solid waste, mathematical modelAbstract
This article is dedicated to the improvement of the mathematical model of the hydraulic drive of the mechanism of the garbage truck’s sealing plate, taking into account the wear of the hydraulic cylinder. An improved nonlinear mathematical model of the operation of the hydraulic drive of the garbage truck’s sealing plate mechanism is proposed, which takes into account the wear of the hydraulic cylinder and allows to numerically study the dynamics of the drive and determine that taking into account the wear of the hydraulic cylinder significantly affects the main parameters of the hydraulic drive of the garbage truck’s sealing plate mechanism. This study of the mathematical model was carried out using the fourth-order numerical Runge-Kutta-Felberg method with an adaptive integration step. Graphical dependencies were plotted to compare changes in the main parameters of the hydraulic drive of the garbage truck’s sealing plate mechanism without taking into account the wear of the hydraulic cylinder and with taking into account the wear. It has been established that the creation of a linearized mathematical model of the hydraulic drive of the garbage truck’s sealing plate mechanism, taking into account the wear of the hydraulic cylinder
References
Dykha O., Sviderskyi V., Holenko K. (2024) Pidvyshchennia antyfryktsiinykh kharakterystyk porshnevykh ushchilnen kompresora kondytsionera avtomobilia [Increasing the anti-friction characteristics of car air conditioner compressor piston seals]. Herald of Khmelnytskyi National University. Technical sciences, 333(2), 314-321, https://doi.org/10.31891/2307-5732-2024-333-2-50.
Khomenko IM, Kindrachuk MV, Kobrynets AK (2010) Hranychnodopustymyi znos mashyn [Maximum permissible wear of machines]. Problems of friction and wear, 52, 28-37.
Petrov O., Kozlov L., Lozinskiy D., Piontkevych O. (2019) Improvement of the hydraulic units design based on CFD modeling. In: Lecture Notes in Mechanical Engineering XXII, 653-660, https://doi.org/10.1007/978-3-030-22365-6_65.
Tataryants M.S., Zavinsky S.I., Troshin A.G. (2015) Development of a methodology for calculating loads on the screw and energy consumption of screw presses. ScienceRise, 6 (2), 80-84, https://doi.org/10.15587/2313-8416.2015.44378.
Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O., Alekseiev A.Ye. (2024) Determination of the regularity of the rate of wear of the working hydraulic cylinder of the mechanism of the sealing plate of the garbage truck from the pressing force. Problems of Tribology, 29(1/111), 38-44, https://doi.org/10.31891/2079-1372-2024-111-1-38-44
Nosenko A.S., Domnickij A.A., Altunina M.S., Zubov V.V. (2019) Theoretical and experimental research findings on batch-operation bin loader with hydraulically driven conveying element. MIAB. Mining Informational and Analytical Bulletin, 11, 119-130, http://dx.doi.org/10.25018/0236-1493-2019-11-0-119-130.
Lobov N.V., Maltsev D.V., Genson E.M. (2019) Improving the process of transport of solid municipal waste by automobile transport. Proceedings of IOP Conference Series: Materials Science and Engineering. IOP Publishing, 1(632), 012033, https://doi.org/10.1088/1757-899X/632/1/012033.
Kotomchin A.N., Lyakhov Yu.G. (2019) Analysis of failures of knots and units of construction, road, lifting and transport machines and specialized motor transport on the example of MUE "Communalderservice". Engineering & Computer science, 3, 174-178.
Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O. (2023) Establishing the peculiarities of tire wear of garbage trucks during the transportation of municipal solid waste. Problems of Tribology, 28(1/107), 59-64, https://doi.org/10.31891/2079-1372-2023-107-1-59-64
Kabashev R.A. (1997) Road and construction machines: abrasive wear of the working parts of earthmoving machines. Almaty: Gylym.
Nurakov S.N., Savinkin V.V. (2008) About development methods for calculating the wear of the rod cylinder interface of hydraulic machines. Proceedings of the Karaganda State Technical University, 3 (32), 96.
Shalapai VV, Machuga OS (2023) Vtraty potuzhnosti u hidrotsylindri vnaslidok protikannia hidravlichnoi ridyny cherez neshchilnist [Power loss in the hydraulic cylinder due to hydraulic fluid leakage through non-tightness]. Comprehensive quality assurance of technological processes and systems – 2023: Proceedings of the XIII International Scientific and Practical Conference, May 25-26, 2023, Chernihiv. National University "Chernihiv Polytechnic", 287-289.
Kargin R.V., Yakovlev I.A., Shemshura E.A. (2017) Modeling of workflow in the grip-container-grip system of body garbage trucks. Procedia Engineering, 206, 1535-1539, https://doi.org/10.1016/j.proeng.2017.10.727.
Bereziuk O.V. (2005) Vibratsiinyi hidropryvod plyty presuvannia tverdykh pobutovykh vidkhodiv u smittievozakh [Vibration hydraulic drive of the solid waste sealing plate in garbage trucks] Diss. Cand. of Eng. Sciences: 05.02.03 – Drive systems, Vinnytsia, 217.
Perekrestov A.V. (1983) Zadachi po obiemnomu hidropryvodu [Problems on volumetric hydraulic drive]. Kyiv: Vyshcha shkolaб 145.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Problems of Tribology
This work is licensed under a Creative Commons Attribution 4.0 International License.
